Festool PN574422 ユーザーズマニュアル

Supplemental Owner’s Manual 

5

poorly maintained power tools.

 

►

Keep cutting tools sharp and clean. Properly maintained tools 

with sharp cutting edges are less likely to bind and are easier 

to control. 

 

►

Use the power tool, accessories, and tool bits etc. in accor-

dance with these instructions, taking into account the working 

conditions and the work to be performed. Use of the power 

tool for operations different from those intended could result 

in a hazardous situation.

 

►

To reduce the risk of serious injury, never alter or misuse the 

power tool.

 

►

Have your power tool serviced by a qualified repair person 

using only identical replacement parts. This will ensure that 

the safety of the power tool is maintained.

 

►

Mortising bits must be rated for at least the speed recom-

mended on the tool. Mortising bits running over rated speed 

can fly apart and cause injury.

 

►

Always use the fence. The fence protects the operator from 

unintentional contact with the mortising bit. When the fence 

is removed from the joiner, the spinning and oscillating cutter 

is exposed and can cause serious injury.

 

►

Keep hands away from the cutting area. Never place your 

hand on the front face of the fence while the tool is running.

 

►

Use only Festool authorized mortising bits. Non-approved 

mortising bits can come loose during operation.

 

►

Never use dull or damaged mortising bits. Dull or damaged 

mortising bits can cause the tool to lurch sideways unexpect-

edly and lead to a loss of control of the power tool.

 

►

Do not operate the tool if the spring-loaded fence does not 

return to its forward rest position. The fence covers the mor-

tising bit and prevents accidental contact. If the slides of the 

fence do not move freely, have the tool serviced immediately.

 

►

Wait for the cutter to stop before setting the tool down. An 

exposed cutter may engage the surface leading to possible 

loss of control and serious injury.

 

►

Use clamps or other practical way to secure and support the 

workpiece to a stable platform. Holding the work by hand or 

against your body is unstable and may lead to loss of control.

 

►

Substantial or repeated inhalation of dust and other airborne 

contaminants, in particular those with a smaller particle 

size, may cause respiratory or other illnesses. Various dusts 

created by power sanding, sawing, grinding, drilling and other 

construction activities contain chemicals or substances known 

(to the State of California and others) to cause cancer, birth 

defects or other reproductive harm. Some examples of these 

chemicals/substances are:

 

►

lead from lead-based paints;

 

►

crystalline silica from bricks, cement, and other masonry 

products;

 

►

arsenic and chromium from chemically-treated lumber; and

 

►

some wood dusts, especially from hardwoods, but also from 

some softwoods such as Western Red Cedar.

 

►

The risk from these exposures varies, depending on how 

often you do this type of work. To reduce your exposure to 

these chemicals: work in a well ventilated area and use a 

properly functioning dust extraction system. When the inhala-

tion of dust cannot be substantially controlled, i.e., kept at or 

near the ambient (background) level, the operator and any 

bystanders should wear a respirator approved by NIOSH for 

the type of dust encountered.

Power Consumption

720 Watts (6.25 amps @ 120 volts)

Motor Speed

21,000 RPM (no load)

Mortising Depth

15 - 70 mm (0.6 - 2.75“)

Mortising Width

13.5mm & 16.5mm  + bit diameter

Mortising Bit Range

8mm, 10mm, 12mm, 14mm

Spindle Thread

M8 x 1

Weight

5.2 kg (11.5 lbs)

All metric dimensions are controlling. Mortising bit dimen-

sions are critical for safe operation, and are presented in 

metric units only.

The Domino tenon joiner is designed to produce mortises in 

soft and hard wood, chip board, plywood and fiber boards. All 

applications beyond this are regarded as improper use. The 

tool should not be altered or used for any other purpose other 

than as specified in these operating instructions. Using the 

tool in contravention to this manual may lead to injury and will 

void your warranty. The user shall be responsible and liable for 

accidents, injury, and property damage resulting from misuse or 

abuse of this tool.