Makita BHP456(LXPHOL*1) ユーザーズマニュアル

P 3/10

DISASSEMBLING

(2) Remove Drill chuck. (Fig. 4)

*Note: The rotational direction is viewed from operator.
1. Grip Hex wrench 10 with Drill chuck and hold Machine.

    Important:

    Be sure to hold the grip of Machine tightly with sufficient

    counterclockwise* force against clockwise* recoil force

    of Machine.  

2. Pull Switch trigger slowly.

3. Spindle rotates counterclockwise* and consequently

    Drill chuck is removed from spindle.  

Hex wrench 10

ASSEMBLING

end of the threaded

portion of Spindle

Drill chuck

(1) Set the machine. (Figs. 5, 6)

(2) Set Hex wrench 10 to vise as described in Fig. 3.

Turn Drill chuck clockwise until it sits on

the end of the threaded portion of Spindle.

F/R Change lever 

Set Speed change lever 

to Low speed mode

indicated by "1". 

Set Change ring 

to Drill mode. 

Speed change lever

Change ring

Set F/R Change lever to

Forward (clockwise) rotation.

Attach battery. 

Counterclockwise* force

to be applied by operator

Clockwise* recoil force

of Machine