Grizzly G0704 ユーザーズマニュアル
-14-
model g0704 (mfg. since 09/09)
Inventory
contents
Qty
A. mill/drill w/stand ......................................... 1
b. open end Combo Wrench 17/19 ................ 1
c. open end Combo Wrench 8/10 ................. 1
D. bottle for oil ............................................... 1
E. tool box...................................................... 1
f. large handwheel handle ........................... 1
G. small handwheel handles ......................... 3
H. t-bolts m10-1.5 x 60 (vise mounting) ......... 2
Flat Washers 10mm (vise mounting) .......... 2
hex nuts m10-1.5 (vise mounting).............. 2
I. drill Chuck .................................................. 1
J. Chuck Key .................................................. 1
K. phillips screwdriver .................................... 1
L. Flat screwdriver .......................................... 1
M. arbor b16 x r8 ........................................... 1
N. hex Wrench set 2, 3, 4, 5, & 6mm ...... 1 ea.
Not Shown:
hex bolts m10-1.5 x 50 .............................. 4
Flat Washers 10mm ................................... 4
figure 4. g0704 out of the crate.
a
The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
nents shipped with your machine. Lay the compo-
nents out to inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, check
the mounting location on the machine or the
packaging materials. Sometimes parts are
pre-installed for shipping, or they become
hidden by packaging materials.