Miller Electric Deltaweld Series ユーザーズマニュアル
Delta-Fab
Input Power
3-Phase, 230/460/575 V
Rated Output
375 A at 100% Duty Cycle
450 A at 60% Duty Cycle
450 A at 60% Duty Cycle
Voltage
10 – 45 V
Weight
374 lb (170 kg)
Industrial Applications
Heavy-to-Light Fabrication
Processes
MIG (GMAW)
with mild steel, flux cored,
stainless steel, and
aluminum wires
with mild steel, flux cored,
stainless steel, and
aluminum wires
Quick
Specs
Specs
Delta-Fab System
MIG Welding
Power Source
Issued April 2008 • Index No. DC/15
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
International Headquarters
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
24A Wire Feeder
Input Power
24 VAC / 7 A
Electrode Wire Diameter Capacity
.023– 3/32 in (0.08 – 2.4 mm)
Wire Speed
75 – 750 IPM (1.9 – 16.5 m/min)
Remote Voltage Control
Standard
Weight
40 lb (18 kg)
Large analog volt and ammeters for
easy viewing.
easy viewing.
Solid-state weld contactor provides
longevity to match the ultra-durable
and reliable reputation of the Delta-Fab.
longevity to match the ultra-durable
and reliable reputation of the Delta-Fab.
Large output voltage range provides
more flexibility on a variety of wire
diameters. Also aids operator with
voltage losses that occur when operating
long distances from power source.
more flexibility on a variety of wire
diameters. Also aids operator with
voltage losses that occur when operating
long distances from power source.
115 VAC duplex receptacle provides
15 amps of auxiliary power.
15 amps of auxiliary power.
Four-Drive-Roll feeding system with
independent tension control handles
small and large diameter wires. (Drive
rolls and guides ordered separately.)
independent tension control handles
small and large diameter wires. (Drive
rolls and guides ordered separately.)
Remote voltage control is standard.
Parameter adjustments can be made
in weld cell or at a remote location.
Parameter adjustments can be made
in weld cell or at a remote location.
Run-in standard on 24A for better
arc-starting performance on a variety
of wires.
arc-starting performance on a variety
of wires.
14-pin select is easy to set up with
no external switches to put in the
wrong position.
no external switches to put in the
wrong position.
14-pin receptacle provides quick,
direct connection to wire feeders and
accessories.
direct connection to wire feeders and
accessories.
The Power of Blue
®
.
Welder is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
See option and package
descriptions on page 3.
descriptions on page 3.
NEW! MIG Power Source Solutions
Line voltage compensation keeps
welding parameters constant even
when input voltages change ±10%.
Eliminates need to change welding
parameters throughout the day.
welding parameters constant even
when input voltages change ±10%.
Eliminates need to change welding
parameters throughout the day.
Material specific output studs
provide the flexibility to produce the
optimal arc characteristics for
aluminum, stainless steel and all
other materials.
provide the flexibility to produce the
optimal arc characteristics for
aluminum, stainless steel and all
other materials.
Thermal overload protection
auto matically shuts down the system
to prevent high repair costs.
auto matically shuts down the system
to prevent high repair costs.
Auto Remote Sense
™
automatically
selects remote control requirements
through the 14-pin receptacle.
Eliminates switches and confusion
for the operator.
through the 14-pin receptacle.
Eliminates switches and confusion
for the operator.
Delta-Fab
™
System
MIGRunner
®
Package shown