Toshiba B-SX600 SERIES ユーザーズマニュアル

 

8- 1 

This section describes the functions of the LCD Message Display, LED’s and keys on the Operation 
Panel. 

 

The Operation Panel is equipped with the LCD Message Display, which is used to indicate the state of 
the printer, 4 LED’s, and 9 keys.    Please see the table below for details. 
 

Shows the menu or error information. 

Illuminates in green when the printer is turned on. 

Illuminates in green when the printer is ready, and goes out when the 
printer is in a pause state or while the menu is being displayed. 

Illuminates in red when an error occurs, and flashes in red in the event 
of a warning. 

Flashes in green when data is received, and illuminates in green when 
data is in the receive buffer. 

Used to place the printer in a pause or ready state. 

Used to feed the media for a single page or label length. 

Used to display the menu when the printer is in a ready or pause state.   
When held down, the [Menu] key will be locked, and when held down 
again, it will be unlocked. 

Used to choose an item on the left while the menu is being displayed. 

Used to choose an item on the right while the menu is being displayed.

Used to choose an item above while the menu is being displayed. 

Used to choose an item below while the menu is being displayed. 
When the model with the Cutter Unit is used, holding down this key in a 
ready or pause state causes the media to be cut. 

Used to determine the settings while the menu is being displayed. 

Used to clear an error when it occurs. 
When held down, print data is cleared.