Toshiba B-EV4D SERIES ユーザーズマニュアル

ENGLISH VERSION EO1-33088 

2.1 Precautions 

E2- 1 

 
 
 
 
 

 
 
 
 
 
 
 
 
 
 

 

 

This section outlines the steps necessary to setup your printer prior to its 

operation.  The section includes precautions, connecting cables, 

assembling accessories, loading media, and performing a test print. 

 

 

To insure the best operating environment, and to assure the safety of the 

operator and the equipment, please observe the following precautions. 
•  Operate the printer on a stable, level, operating surface in a location 

free from excessive humidity, high temperature, dust, vibration or 

direct sunlight. 

•  Keep your work environment static free.  Static discharges can cause 

damage to delicate internal components. 

•  Make sure that the printer is connected to a clean source of AC Power 

and that no other high voltage devices that may cause line noise 

interference are connected to the same mains.  

•  Ensure that the printer is connected only to AC mains that has a 

proper ground (earth) connection. 

•  Do not operate the printer with the cover open.  Be careful not to 

allow fingers or articles of clothing to get caught into any of the 

moving parts of the printer. 

•  Make sure to turn off the printer power and to remove the power 

adapter connector from the printer whenever working on the inside of 

the printer or when cleaning the printer. 

•  For best results, and longer printer life, use only TOSHIBA TEC 

recommended media. (Refer to the Supply Manual.) 

•  Store the media in accordance with the specifications. 
•  This printer mechanism contains high voltage components; therefore 

you should never remove any of the covers of the machine as you may 

receive an electrical shock.  Additionally, the printer contains many 

delicate components that may be damaged if accessed by unauthorized 

personnel. 

•  Clean the outside of the printer with a clean dry cloth or a clean cloth 

slightly dampened with a mild detergent solution. 

•  Use caution when cleaning the thermal print head as it may become 

very hot while printing.  Wait until it has had time to cool before 

cleaning.  Use only the TOSHIBA TEC recommended print head 

cleaner to clean the print head. 

•  Do not turn off the printer power or remove the power plug while the 

printer is printing or while the Indictor Lamp is flashing.