Toshiba B-SV4D-GS ユーザーズマニュアル
- 123 -
6.3.14 FEED COMMAND
[ESC] T
Function
Feeds the paper.
Format
[ESC] Tabcde [LF] [NUL]
Term
a:
Type of sensor
0: No sensor
1: Reflective sensor
2: Transmissive sensor (when using normal labels)
3: Transmissive sensor (when using normal labels)
4: Reflective sensor
1: Reflective sensor
2: Transmissive sensor (when using normal labels)
3: Transmissive sensor (when using normal labels)
4: Reflective sensor
b:
Selects cut or non-cut
0: Non-cut
1: Cut
1: Cut
c:
Feed
mode
C: Batch mode (Cut and feed when “Cut” is selected for parameter b.)
D: Strip mode
D: Strip mode
(with back feed)
E: Strip mode
(Reserved for future)
d:
Feedspeed
1: 2 inches/sec
2: 2 inches/sec
3: 3 inches/sec
4: 4 inches/sec
5: 5 inches/sec
6: 5 inches/sec
7: 5 inches/sec
8: 5 inches/sec
9: 5 inches/sec
A: 5 inches/sec
e:
With/without
ribbon
Ignore
Explanation
(1) Type of sensor
c
No sensor:
Feeding takes place according to the parameter designated by the Label Size
Set Command.
d
Reflective sensor:
Feeding takes place according to the parameter designated by the Label Size
Set Command. However, the black mark provided on the back side of the tag
paper is automatically sensed by the reflective sensor and the stop position is
finely adjusted.
paper is automatically sensed by the reflective sensor and the stop position is
finely adjusted.
e
Transmissive sensor (when using normal labels):
Feeding takes place according to the parameter designated by the Label Size
Set Command. However, the label-to-label gap is automatically sensed by the
transmissive sensor and the stop position is finely adjusted.
transmissive sensor and the stop position is finely adjusted.