Netgear UTM25EW-100NAS ユーザーズマニュアル

8-28

Virtual Private Networking Using SSL Connections

To add an SSL VPN tunnel client route:

1. Select VPN > SSL VPN from the menu. The SSL VPN s submenu tabs appear, with the 

Policies screen in view.

2. Click the SSL VPN Client submenu tab. The SSL VPN Client screen displays (see 

).

3. In the Add Routes for VPN Tunnel Clients section of the screen, specify information in the 

following fields:

•

Destination Network. The destination network IP address of a local network or subnet. 
For example, enter 192.168.1.60.

•

Subnet Mask. The address of the appropriate subnet mask.

4. Click the add table button. The new client route is added to the Configured Client Routes 

table.

Restart the UTM if VPN tunnel clients are currently connected. Restarting forces clients to 
reconnect and receive new addresses and routes.

To change the specifications of an existing route and to delete an old route:

1. Add a new route to the Configured Client Routes table.

2. In the Configured Client Routes table, to the right of the route that is out-of-date, click the 

delete table button.

If an existing route is no longer needed for any reason, you can delete it.

Network resources are groups of IP addresses, IP address ranges, and services. By defining 
resource objects, you can more quickly create and configure network policies. You do not need to 
redefine the same set of IP addresses or address ranges when you configure the same access 
policies for multiple users.

Defining network resources is optional; smaller organizations can choose to create access policies 
using individual IP addresses or IP networks rather than predefined network resources. But for 
most organizations, NETGEAR recommends that you use network resources. If your server or 
network configuration changes, you can perform an update quickly by using network resources 
instead of individually updating all of the user and group policies.