Netgear UTM25EW-100NAS ユーザーズマニュアル

Virtual Private Networking Using SSL Connections

8-31

5. Click Apply to save your settings. The new configuration is added to the Defined Resource 

Addresses table.

To delete a configuration from the Defined Resource Addresses table, click the delete table button 
to the right of the configuration that you want to delete.

You can define and apply user, group and global policies to predefined network resource objects, 
IP addresses, address ranges, or all IP addresses and to different SSL VPN services. A specific 
hierarchy is invoked over which policies take precedence. The UTM policy hierarchy is defined 
as:

1. User policies take precedence over all group policies.

2. Group policies take precedence over all global policies.

3. If two or more user, group or global policies are configured, the most specific policy takes 

precedence. 

Object Type

From the pull-down menu, select one of the following options:
• IP Address. The object is an IP address. You must enter the IP address 

or the FQDN in the IP Address / Name field.

• IP Network. The object is an IP network, You must enter the network IP 

address in the Network Address field and the network mask length in the 
Mask Length field.

IP Address / Name

Applicable only when you select IP Address as the 
Object Type: enter the IP address or FQDN for the 
location that is permitted to use this resource.

Network Address

Applicable only when you select IP Network as the 
Object Type: enter the network IP address for the 
locations that are permitted to use this resource.

Mask Length

Applicable only when you select IP Network as the 
Object Type: as an option, enter the network mask 
(0-31) for the locations that are permitted to use this 
resource.

Port Range / Port Number A port or a range of ports (0-65535) to apply the policy to; the policy is 

applied to all TCP and UDP traffic that passes on those ports. Leave the 
fields blank to apply the policy to all traffic.