Netgear UTM25EW-100NAS ユーザーズマニュアル

Monitoring System Access and Performance

11-29

The Connection Status screen displays the information that is described in 

Depending on the type of connections, any of the following buttons may be displayed on the 
Connection Status screen:

•

renew. Click to renew the DHCP lease.

•

release. Click to disconnect the DHCP connection.

•

disconnect. Click to disconnect the static IP connection.

For the UTM25 only, the procedure to view the status of the WAN2 port is identical to the one for 
the WAN1 port with the exception that you must select the WAN2 ISP Settings submenu tab to 
display the WAN2 ISP Setting screen.

The LAN Groups screen contains a table of all IP devices that the UTM has discovered on the 
local network. The LAN Setup screen lets you access the DHCP log.

To view the attached devices in the LAN Groups screen:

1. Select Network Config > LAN Settings from the menu. The LAN Settings submenu tabs 

appear, with the LAN Setup screen in view (see 

, which contains 

some profiles in the VLAN Profiles table as an example).

Connection Time

The period that the UTM has been connected through the WAN port. 

Connection Type

DHCP or Static IP.

Connection Status

Connected or Disconnected.

IP Address

The addresses that were automatically detected (see 

) or that you configured on the WAN1 ISP Settings 

screen (UTM25) or WAN ISP Settings screen (UTM10) (see 

Subnet Mask

Gateway

DNS Server

DHCP Server

The DHCP server that was automatically detected (see 

) or that you configured for a VLAN profile on the 

Edit VLAN Profile screen (see 

).

Lease Obtained

The time when the DHCP lease was obtained.

Lease Duration

The period that the DHCP lease remains in effect.