Netgear UTM25-100NAS ユーザーズマニュアル

4-22

LAN Configuration

3. Click Apply to save your settings.

To define the DMZ WAN Rules and LAN DMZ Rules, see 

 and

, respectively.

Static Routes provide additional routing information to your UTM. Under normal circumstances, 
the  has adequate routing information after it has been configured for Internet access, and you do 
not need to configure additional static routes. You should configure static routes only for unusual 
cases such as multiple firewalls or multiple IP subnets located on your network.

Enable DNS Proxy

This is optional. Select the Enable DNS Proxy radio button to enable the UTM 
to provide a LAN IP address for DNS address name resolution. This setting is 
enabled by default.
Note: The UTM still services DNS requests sent to its LAN IP address unless 
you disable DNS Proxy in the firewall settings (see 

Note: The DMZ LED next to LAN port 4 (see 

) lights 

green to indicate that the DMZ port is enabled.

Note: The  automatically sets up routes between VLANs and secondary IP addresses that 

you have configured on the LAN Multi-homing screen (see 

). Therefore, you do not need 

to manually add a static route between a VLAN and a secondary IP address.