Netgear UTM25-100NAS ユーザーズマニュアル
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Virtual Private Networking Using SSL Connections
8-9
v1.0, September 2009
SSL VPN Wizard Step 4 of 6: Client IP Address Range and Routes
Note that
contains some examples. Enter the settings as explained in
, then click Next to go the following screen.
Figure 8-5
Note: Do not enter an existing route for a VPN tunnel client in the Destination Network
and Subnet Mask fields, otherwise the SSL VPN Wizard will fail and the UTM
will reboot to recover its configuration.
will reboot to recover its configuration.
Note: After you have completed the steps in the SSL VPN Wizard, you can make changes
to the client IP address range and routes by selecting VPN > SSL VPN > SSL
VPN Client. For more information about client IP address range and routes
settings, see
VPN Client. For more information about client IP address range and routes
settings, see
.