Netgear UTM25-100NAS ユーザーズマニュアル

Using the Setup Wizard to Provision the UTM in Your Network

2-29

You have completed setting up and deploying the UTM to the network. The UTM is now ready to 
scan the protocols and services that you specified and perform automatic updates based on the 
update source and frequency that you specified.

If you need to change the settings, or to view reports or logs, log in to the UTM Web Management 
Interface, using the default IP address or the IP address that you assigned to the UTM in 

.

The UTM is ready for use. However, some important tasks that you might want to address before 
you deploy the UTM in your network are listed below:

•

•

.

•

.

•

.

•

.

Note: When you reset the UTM to the original factory default settings after you have 

entered the license keys to activate the UTM (see 

), the license keys are erased. The license keys and the 

different types of licenses that are available for the UTM are no longer displayed 
on the Registration screen. However, after you have reconfigured the UTM to 
connect to the Internet and to the NETGEAR registration server, the UTM 
retrieves and restores all registration information based on its MAC address and 
hardware serial number. You do not need to re-enter the license keys and re-
activate the UTM.