Netgear UTM25-100NAS ユーザーズマニュアル

3-24

Manually Configuring Internet and WAN Settings

4. Click Apply to save your changes. 

•

If you want the ability to manage the UTM remotely, enable remote management (see 

). If you enable remote 

management, NETGEAR strongly recommend that you change your password (see 

). 

•

You can set up the traffic meter for each WAN, if desired. See 

Use this MAC Address

Select the Use this MAC Address radio button to manually enter the 
MAC address in the field next to the radio button. You would typically enter 
the MAC address that your ISP is requiring for MAC authentication.
Note: The format for the MAC address is 01:23:45:67:89:AB (numbers 0-9 
and either uppercase or lowercase letters A-F). If you enter a MAC 
address, the existing entry is overwritten.

Upload/Download Settings
These settings rate-limit the traffic that is being forwarded by the UTM.

WAN Connection Type

From the pull-down menu, select the type of connection that the UTM uses 
to connect to the Internet: DSL, ADLS, Cable Modem, T1, T3, or Other.

WAN Connection Speed 
Upload

From the pull-down menu, select the maximum upload speed that is 
provided by your ISP. You can select from 56 Kbps to 1 Gbps, or you can 
select Custom and enter the speed in Kbps in the field to the right. 

WAN Connection Speed 
Download

From the pull-down menu, select the maximum download speed that is 
provided by your ISP. You can select from 56 Kbps to 1 Gbps, or you can 
select Custom and enter the speed in Kbps in the field to the right. 

Note: Depending on the changes that you make, when you click Apply, the UTM 

might restart, or services such as HTTP and SMTP might restart.

Note: For the UTM25 only, to configure advanced WAN options for WAN2 port, select 

Network Config > WAN Settings from the menu. The WAN Settings tabs appear, 
with the WAN1 ISP Settings screen in view. Now, click the WAN2 ISP Settings 
tab and then the Advanced option arrow. The WAN2 Advanced Options screen 
displays.