Mitsubishi Electronics 60/60S ユーザーズマニュアル
5. Program
5.6 PLAYBACK
I-195
5.6 PLAYBACK
The playback function enables creation of a program while trying sample machining by manual (handle or
jog) feed or mechanical handle feed.
jog) feed or mechanical handle feed.
A machining program can be created with move distance data obtained by manual operation used as
programmed command values.
programmed command values.
SEARCH MAKE LARGE
FILE
O 100 PLAYBACK
N1 G28 XYZ;
N2 G00 X10.Y10.;
N1 G28 XYZ;
N2 G00 X10.Y10.;
EDIT
[MACHINE] [PLAYBACK : ABS]
X -10.100 X -10.000
Y -10.101 Y -10.000
Z
Y -10.101 Y -10.000
Z
0.000 Z
0.000
[MEMORY]
[ADD]
Playback Edit
x1
Manual
feed
y1
Move
distance
Manual
feed
y1
Move
distance
Start
Check the parameter:
Use parameter #1126 PB-G90 to
determine absolute/incremental values.
Use parameter #1126 PB-G90 to
determine absolute/incremental values.
Search the edit screen for the number of
the machining program to be created in
playback mode.
the machining program to be created in
playback mode.
Turn the playback switch ON.
Error?
Y
N
Move the machine in manual mode.
Create data such as G codes, X and Y axis
commands, and F commands.
commands, and F commands.
Error?
Y
N
Does playback
edit continue?
Y
N
Turn the playback switch OFF.
End
%
O 12345678
N1G28X0Y0Z0 ;
N2G00X-10. Y-10.;
N3G01X-10. Y-20.
F1000 ;
Machining program
O 12345678
N1G28X0Y0Z0 ;
N2G00X-10. Y-10.;
N3G01X-10. Y-20.
F1000 ;
Machining program
Machining program
%
O 12345678
N1G28XYZ;
N2G00X-10. Y-10.;
N3G01X20.
Y-10.F1000;
Machining program creation flowchart in playback mode