Motorola 6161252-00-01 ユーザーズマニュアル

Select the ser ver list you want to bind to this Connection Profile and press Return. The ser ver list you 
selected will now be bound to this Connection Profile.

Note: There is no interdependency between NAT and IP Addressing. Also, the Local WAN IP Address and Mask 
fields’ visibility are dependent only on the IP Addressing type.

The Motorola Netopia® Embedded Software Version 8.7.4 using RFC 1483 suppor ts a WAN default profile that 
permits several parameters to be configured without an explicitly configured Connection Profile.

The procedure is similar to the procedure to bind map lists and ser ver lists to a Connection Profile.

From the Main Menu go to the WAN Configuration screen, then the Default Profile screen. Select IP Parameters 
and press Return.

The IP Parameters (Default Profile) screen appears.

                            IP Profile Parameters
                      +-NAT Server List Name-+
         Address Trans+----------------------+s
         IP Addressing| Easy-Servers         |mbered
         NAT Map List.| my_servers           |sy-PAT List
         NAT Server Li| <<None>>             |sy-Servers
         NAT Options..|                      |
         Stateful Insp|                      |
                      |                      |
         Local WAN IP |                      |0.0.0
         Local WAN IP |                      |0.0.0
         Remote IP Add|                      |7.0.0.2
         Remote IP Mas|                      |5.255.255.255
         Filter Set...|                      |
         Remove Filter|                      |
                      |                      |
                      |                      |
                      |                      |
                      |                      |
         RIP Profile O+----------------------+

Up/Down Arrows to select, then Return/Enter; ESC to cancel.

Main

Menu

WAN

Configuration

IP Parameters

WAN Default

Profile