Motorola 6161252-00-01 ユーザーズマニュアル

5-30 Administrator’s Handbook

Select Output Filter 2 and press Return. In the Change Output Filter 2 screen, set the Protocol Type to allow
GRE as shown below.

Windows Networking Broadcasts

Motorola Netopia

software provides the ability to for ward Windows Networking NetBIOS broadcasts. This is

useful for, for example, a Vir tual Private Network, in which you want to be able to browse the remote network to
which you are tunnelling, as par t of your Windows Network Neighborhood.

Routed connections, such as VPNs, can not use NetBEUI to carr y the Network Neighborhood information. They
need to use NetBIOS, because NetBEUI cannot be routed. This feature will allow browsing the Network
Neighborhood without any additional workstation configuration.

You enable this feature in the IP Profile Parameters screen of your Connection Profile. The IP Profile Parameters
screen varies slightly, depending on whether your model router connects directly to the Internet, or if it connects
via an Ethernet connection through a cable or DSL modem. The enabling feature is the same for both:

Using the Tab key, toggle NetBIOS Proxy Enabled from the default No to Yes, and press Return. Your remote
Network Neighborhood becomes accessible from your Windows desktop.

Note:

The remote IP address and subnet mask should strictly match the IP address and subnet mask

configured on the LAN inter face of the remote router. See the following example.

Change Output Filter 2
Enabled: Yes
Forward: Yes
Call Placement/Idle Reset: No Change
Force Routing: No

Source IP Address: 0.0.0.0
Source IP Address Mask: 0.0.0.0
Dest. IP Address: 0.0.0.0
Dest. IP Address Mask: 0.0.0.0
TOS: 0
TOS Mask: 0
Protocol Type: GRE

Return/Enter accepts * Tab toggles * ESC cancels.
Enter the packet specific information for this filter.