Motorola 6161252-00-01 ユーザーズマニュアル

2.

Carefully inser t the point of a pen or an unwound paperclip into the opening.

3.

Press this switch.

If you press the factor y default button for less than 1/2 a second, the unit will continue to run as nor-
mal.

If you press the factor y default button for 3 seconds, when you release it, the Gateway will per form a 
factor y reset, clear all settings and configurations, except those saved as Saved Configuration(s). (See 

.) The Router will then reboot.

If you press the factor y default button for 6 seconds, when you release it, the Gateway will per form a 
factor y reset, clear all settings and configurations, including Saved Configurations, and reboot.

If you suspect that power was restored after a power outage and the Router is connected to a remote site, you 
may need to switch the Router off and then back on again. After temporar y power outages, a connection that 
still seems to be up may actually be disconnected. Rebooting the gateway should reestablish the connection.

Motorola, Inc. is committed to providing its customers with reliable products and documentation, backed by 
excellent technical suppor t.

Look in this guide for a solution to your problem. You may find a solution in this troubleshooting appendix or in 
other sections. Check the index for a reference to the topic of concern. If you cannot find a solution, complete 
the environment profile below before contacting Motorola Technical Suppor t.

Locate the Router’s model number, product serial number, and firmware version. The serial number is on 
the bottom of the gateway, along with the model number. The firmware version appears in the Motorola 

Netopia

®

 Router’s Main Menu screen.

Model number:

Serial number:

Firmware version:

What kind of local network(s) do you have, with how many devices?

Ethernet

TCP/IP