Honeywell GS9590 ユーザーズマニュアル
Check Digits
The following selections allow you to specify whether the check digit
should be transmitted at the end of the scanned UPC-A or UPC-E
data or not.
should be transmitted at the end of the scanned UPC-A or UPC-E
data or not.
CodeGate/Manual Activation (Voyager 9520/40,
VoyagerGS 9590)
VoyagerGS 9590)
Use the following programming codes to control CodeGate button/
trigger functions. Any time CodeGate is Active, you must push the
CodeGate button (on the top of the scanner) or press the trigger to
read a bar code. Whenever CodeGate is Inactive, the CodeGate
button/trigger does not need to be pressed. Bar codes are
automatically read when they are in the scanner’s field of view.
trigger functions. Any time CodeGate is Active, you must push the
CodeGate button (on the top of the scanner) or press the trigger to
read a bar code. Whenever CodeGate is Inactive, the CodeGate
button/trigger does not need to be pressed. Bar codes are
automatically read when they are in the scanner’s field of view.
³
1 0 7 5 1 7
³
1 0 7 5 0 7
Don’t Transmit UPC-A
Check Digits
*Transmit UPC-A
Check Digits
³
1 0 7 5 1 6
³
1 0 7 5 0 6
*Don’t Transmit UPC-E
Check Digits
Transmit UPC-E Check
Digits
³
1
1
8
7
0
3
³
1
1
8
7
1
3
CodeGate Active Out
of Stand
CodeGate Inactive Out
of Stand