Konica Minolta C450 ユーザーズマニュアル
![Konica Minolta](https://files.manualsbrain.com/attachments/35219ede2c552e8742b3de2ff2e860862a7599e0/common/fit/150/50/c44fe408e3f52ec6eb70851dc1658706f6e810acc0fd6ff6802de7d0c07a/brand_logo.png)
3
Transmission
3-34
C450
3.8
Manual transmission
Manual transmission
This operation is performed when sending documents and confirming the
status of the receiving machine.
Memory transmission cannot be used with manual transmission.
status of the receiving machine.
Memory transmission cannot be used with manual transmission.
1
Press [Fax] on the control panel to display the fax screen.
2
Place the original.
–
For details, refer to “Placing the original on the machine” on
page 3-7.
page 3-7.
3
Press [Off-Hook].
–
If [RX] has been selected, press [TX] to switch to the transmission
mode.
mode.
4
Set the functions of scan setting as necessary.
–
See “Setting transmission conditions” on page 3-11 for setting
functions on the fax screen.
functions on the fax screen.
–
See “Application functions overview” on page 7-5 for setting func-
tions on the fax application screen.
tions on the fax application screen.
5
Select the destination with the keypad.
–
You can input up to 60 digits.
–
Pressing [On-Hook] returns the display to the fax screen.
–
When an external telephone is connected, documents can be sent
by lifting up the receiver of the external telephone.
by lifting up the receiver of the external telephone.
6
When the signal sounds, press [Start] of the off-hook screen.
–
Pressing [Start] on the control panel allows the off-hook start fax
communication screen confirmation to appear. Transmission starts
when you press [Yes].
communication screen confirmation to appear. Transmission starts
when you press [Yes].
–
When the external telephone is connected, hang up the receiver of
the external telephone after pressing [Start].
the external telephone after pressing [Start].
Transmission begins.