KYOCERA 4550ci ユーザーズマニュアル

Select what to do when the punch waste box becomes full during printing.

This setting is displayed when an optional 4,000-sheet finisher and a hole punch unit are installed.

Select what to do when the selected paper size or type does not match paper size or type loaded in the specified 
paper source while printing from the computer by specifying the cassette or multi-purpose tray.

Select what to do when it is detected that the cassette paper size setting does not match the actual paper size 
that is fed.

The page from which printing is resumed when a paper jam occurs during a job with stapling can be selected.

This setting is displayed when an optional 1,000-sheet finisher or 4,000-sheet finisher is installed.

Use the procedure below to specify the settings for error handling.

Press the System Menu key.

Press [Common Settings] and then [Next] of Error Handling.

Press [Change] at the error for which you wish to change the handling. 

Select the error handling method in the selection screen for each of the errors and then press [OK]. 

The previous screen appears. To set the handling for a different error, repeat steps 3 and 4.

Ignore

Printing continues without punching.

Display Error

Error message to cancel printing is displayed.

Ignore

The setting is ignored and the job is printed.

Display Error

Error message to cancel printing is displayed.

Ignore

Detection does not take place and the job is printed.

Display Error

Error message to cancel printing is displayed.

Resume at Top of 
Page

Resume printing from the first page of the document.

Resume at Jammed 
Page

Resume printing from the page where the jam occurred.