Konica Minolta 2590 MF ユーザーズマニュアル
Basic Fax Operation
30
Basic Fax Operation
This section contains basic information of fax transmission.
"
Only Statement (ST), Letter (LT), Legal (LG), A5, or A4 size docu-
ments are available for fax transmission.
ments are available for fax transmission.
Sending a Fax Using the ADF
If the ADF is used, original documents containing multiple pages can be auto-
matically scanned.
matically scanned.
"
Do not load original documents that are bound together, for example,
with paper clips or staples.
with paper clips or staples.
"
Do not load more than 50 sheets; otherwise an original document mis-
feed or damage to the document or machine may occur.
feed or damage to the document or machine may occur.
"
If the original document is not loaded correctly, it may not be fed in
straight, or an original document misfeed or damage to the document
may occur.
straight, or an original document misfeed or damage to the document
may occur.
"
Do not open the ADF cover while documents loaded into the ADF are
being scanned.
being scanned.
1
Press the Fax key to enter Fax mode.
2
Make sure that there is no document on the original glass.
3
Put the document into the ADF
document feed tray face up.
document feed tray face up.
4
Adjust the document guides to the document size.
5
Press the Resolution key to specify the desired image quality.
"
The document image quality can be adjusted by pressing the Resolu-
tion key. For details, refer to “Improving Resolution” on page 34.
tion key. For details, refer to “Improving Resolution” on page 34.
6
Specify the fax number of the recipient in one of the following ways:
–
Direct dialing
–
Using the one-touch dial key (including the group dial function)