Metrologic Instruments MS1633 ユーザーズマニュアル

 

www.metrologic.com 

18 

E

STABLISHING 

C

OMMUNICATION VIA 

LUETOOTH 

T

ECHNOLOGY

 

When FocusBT is Used with an MS9535 Cradle 

 
FocusBT can be configured to communicate with an MS9535 cradle but it will 
require the FocusBT to be configured to use a special communication protocol 
used by the MS9535 cradle.  Scan the Enable MS9535 Cradle Protocol bar 
code below to enable the special communication protocol. 
 

 The 

FocusBT cannot be configured or flash-upgraded via an 

MS9535 cradle.  Communication settings of the cradle cannot be 
changed by scanning configuration bar codes with the FocusBT.  
Support for the MS9535 cradle is limited to bar code 
transmission. 

 
 

Do not forget to disable the MS9535 cradle protocol when the 
cradle is no longer in use. 

 
 

³

1

2

5

5

1

4

³

1

2

5

5

0

4

 
The operation range of the communication via Bluetooth technology is at least  
10 meters between the scanner and host system.  When FocusBT is out of 
operation range for Bluetooth technology, the communication link will break and 
the blue LED will start to flash on the scanner. 
 
FocusBT can be configured to store scanned bar codes into the non-volatile 
memory when the connection for Bluetooth technology is inactive.  The scanner 
will transmit the bar codes and erase them from memory once the connection for 
Bluetooth technology is re-established.  The size of the non-volatile memory is 
32768 bytes. 

 

Scan the following bar codes to enable or disable Range Gate Mode. 
 

³

1

2

3

7

0

7

³

1

2

3

7

1

7