Metrologic Instruments MS1633 ユーザーズマニュアル

 

 25

S

CANNER 

O

PERATION

 

 

 

  

 

This tone indicates the connection via Bluetooth technology has been made. 
 

This tone indicates the connection via Bluetooth technology is disconnected. 
 

When the communication link for Bluetooth technology is not active, the 
scanner will emit a double razz tone and the Blue LED will start to flash.  This 
can occur when the scanner is out of the communication range for Bluetooth 
technology from the host system and the RangeGate feature is disabled. 
 

 
 
 

 

 

 

 

The MS1633 has three LED indicators (yellow, white and 
blue) located on the top of the scanner.  When the scanner 
is on, the flashing or stationary activity of the LEDs 
indicates the status of the current scan and the scanner. 
 

The LEDs will not be illuminated if the scanner is not 
receiving power from the host or transformer. 

 

The scanner is in stand-by mode.  Present a bar code to 
the scanner and the blue LED will turn on when the IR 
detects the object. 

 

The yellow LED is illuminated when the scanner is in the stand. 

 

The blue LED is illuminated when the scanner is active and linear illumination 
is on or when the scanner is attempting to decode a bar code. 

 

When the scanner successfully reads a bar code it will beep once and the 
white LED will turn on indicating data is being transmitted. 
 
If the scanner does not beep once and the white light does not turn on, then 
the bar code has not been successfully read.