Muratec F-315 ユーザーズマニュアル
4-6
s
endInG
faxes
Real-time transmission (non memory transmission)
Your machine will simply dial the other fax and when it makes contact, your machine
will feed the document through, scanning and transmitting real time
• With real time transmission, you can watch each page as it is scanned and sent.
To perform a real time transmission:
• With real time transmission, you can watch each page as it is scanned and sent.
To perform a real time transmission:
1
Switch to the fax mode by pressing <
copy
4
fax
4
scan
>.
2
Place the document on the ADF.
NOTE: • The document glass cannot be used for real time transmission.
• The document glass is available only for the MFX-1950.
3
Obtain a dial tone, either by:
• Pressing <Advanced Functions> repeatedly until “Monitor” appears, and then
• Pressing <Advanced Functions> repeatedly until “Monitor” appears, and then
press <Enter>.
– or –
Pressing the “Monitor” soft key
–or–
• Lift the handset if you have connected an external telephone to your machine.
Pressing the “Monitor” soft key
–or–
• Lift the handset if you have connected an external telephone to your machine.
In either case, the machine shows:
** Tel Mode **
_
– or –
Press <Advanced Functions> repeatedly until “Memory Tx” appears and press
Press <Advanced Functions> repeatedly until “Memory Tx” appears and press
<Enter>. Then select “Off” and press <Enter> to turn off the memory transmission.
– or –
If you assigned “Memory Tx” to a soft key (page 8-2), turn off the memory transmission
by simply pressing that key.
by simply pressing that key.
NOTE: “Monitor” is a default soft key on the F-315.
4
Dial the fax number.
• Use the numeric keys to dial the number.
–or–
• Press a one-touch key. (See page 3-6.)
–or–
• Press <Speed Dial /Group> and three-digit code. (See page 3-8.)
–or–
• Use the phone directory dialing. (See page 3-11.)
• Use the numeric keys to dial the number.
–or–
• Press a one-touch key. (See page 3-6.)
–or–
• Press <Speed Dial /Group> and three-digit code. (See page 3-8.)
–or–
• Use the phone directory dialing. (See page 3-11.)
NOTE: With real time transmission, only one destination can be dialed.
5
When you hear fax tones from the remote unit, press <Start>.
If a person answers the phone, use the handset to tell that person that you are trying
to send a fax. When you hear fax tones, press <Start>.
If the call fails and you used “Monitor” to dial, press <Advanced Functions> repeatedly
until “Monitor” appears, then press <Enter> or press the “Monitor” soft key to hang up.
If you are using the handset, hang up after pressing <Start>.
NOTE: To cancel the transmission, use Review commands features. (See page 4-8.)