Muratec F-315 ユーザーズマニュアル

4-22 s

endInG

 

faxes

When this feature is activated, you can send documents to an e-mail gateway (fax 

server) by simply entering the fax number.  The machine will automatically add a prefix 

and suffix to the fax number you have entered and send it to the e-mail gateway.

NOTE:  • This function is available only for the MFX-1950. 

• To use this function, the optional NIC(Network Interface Card) is required.

The following functions are not able to combine with sending faxes using the e-

mail gateway:

 

  

- Real time transmission 

  

- Polling 

  

- F-code transmission or F-code polling 

  

-  Manual line selection (This function is only available when the optional 

second phone line module is attached.)

Press <Menu>, <2>, <2>, <1>, <9>, <Enter>.

 





Use the cursor key to select “On”, then press <Enter>.  

 





    If you want the machine to always send fax documents to an e-mail gateway, select 

“On”.  Otherwise, select “Off”.

Enter the prefix that should added before the fax number by using the numeric keys 

(up to 32 characters), and press <Enter>.

    (For example, “Fax=”)

 

Enter the suffix that should be added after the fax number (up to 48 characters) and 

press <Enter> to save the setting.

    (For example, “@domain name”)

 

Press <Reset> to go back to the standby mode.

NOTE:  Total characters of prefix, fax number and suffix should be within 50 characters.  For 

specific prefix and suffix information, please refer to the e-mail gateway documenta-

tion.