Sharp MX-C401 ユーザーズマニュアル

This shows the size of paper loaded in each tray.
For the bypass tray, the paper type appears above the 
paper size.
The selected tray is highlighted.
The approximate amount of paper in each tray is 
indicated by 

. Trays 1 to 4 can be selected to open 

the same screen as when the [Paper Select] key is 
selected.

☞

This shows the number of copies set.

Touch this key to select special modes such as Margin 
Shift and Edge Erase.

☞

 (page 2-40)

Touch this key to select the 2-sided copying function.

☞

 (page 2-15)

Touch this to select an output function such as sort, 
group, offset, or staple sort.

☞

 (page 2-34)

The keys that appear here can be changed to show 
settings or functions that you prefer. The following keys 
appear by factory default:

☞

 (page 2-5)

[File] key, [Quick File] key
Touch one of these keys to use the File function or Quick 
File function of document filing mode. These are the 
same [File] and [Quick File] keys that appear when the 
[Special Modes] key is touched. For information on the 
document filing function, see "6. DOCUMENT FILING".

Do not pull out a tray while paper is being fed from the tray. This will cause a paper misfeed.

(1) While paper is feeding, the job status display of the system bar on the touch panel screen will show the number of 

the tray that is being used to feed paper.

(2) The tray being used to feed paper also appears in green in the paper size display in the base screen on the touch 

panel.

The screen explained in this section appears when 500-sheet paper feed units and finisher are installed. The image will vary 
depending on the equipment installed.

8½x11

8½x11

5½x8½

Auto

8½x11

Plain

8½x14

8½x11

Color Mode

Special Modes

Plain

2-Sided Copy

Output

File

Quick File

Copy Ratio

100%

3.

2.

1.

Original

Paper Select

Full Color

Exposure

Auto

4.

Tray2

Shows the number of the tray being used to feed paper.

Shows the tray being used to feed paper in green.