Sharp TINSE2026QSZZ ユーザーズマニュアル

ページ / 168
105
SYSTEM SETTINGS (ADMINISTRATOR)
6
ENERGY SAVE
"ENERGY SAVE" provides the following four programs 
to reduce your power costs. From an environmental 
perspective, this also helps conserve natural 
resources and reduce pollution.
● AUTO POWER SHUT-OFF
● AUTO POWER SHUT-OFF TIMER
● PREHEAT MODE SETTING
● TONER SAVE MODE
AUTO POWER SHUT-OFF
If the machine is not used for the amount of time set in 
"AUTO POWER SHUT-OFF TIMER", AUTO POWER 
SHUT-OFF will activate and switch the machine to a 
standby state that conserves the maximum amount of 
energy. This program can be used to prevent AUTO 
POWER SHUT-OFF from operating. When this is 
done, the "AUTO POWER SHUT-OFF TIMER" setting 
is disabled. Use this program when circumstances 
require that AUTO POWER SHUT-OFF be disabled.
This program is initially enabled (factory default 
setting).
AUTO POWER SHUT-OFF TIMER
This program is used to set the amount of time after 
which "AUTO POWER SHUT-OFF" activates when the 
machine is not used. 
This function allows you to reduce power costs, and at 
the same time helps conserve natural resources and 
reduce pollution.
The time can be set to as long as 240 minutes in 
increments of one minute.
PREHEAT MODE SETTING
If the printer is not used for the length of time set with 
this program after printing is finished, it will enter 
preheat mode. This function reduces your power 
costs, and at the same time helps conserve natural 
resources and reduce pollution. 
Select the most suitable setting to match your pattern 
of use of the printer.
The time can be set to as long as 240 minutes in 
increments of one minute. (Preheat mode cannot be 
disabled.)
TONER SAVE MODE
The toner save mode will reduce toner consumption by 
approximately 10% in the automatic, text, and 
text/photo exposure modes. Copies will be lighter but 
still adequate for general use. Selection of this mode 
has no effect on the photo and super photo modes.
This program is initially disabled (factory default 
setting).
Rather than disabling the auto power 
shut-off feature, we suggest that you 
first try lengthening the time set in 
"AUTO POWER SHUT-OFF TIMER" In 
most cases a suitable timer setting 
will allow work to proceed with 
minimal delay and still enable you to 
enjoy the benefits of power 
conservation.
• Select a suitable time according to your 
pattern of use of the machine.
• If "AUTO POWER SHUT-OFF" is disabled, 
the time setting is also disabled.
SYSTEM SETTINGS
ENERGY SAVE
AUTO POWER SHUT-OFF
AUTO POWER SHUT-OFF TIMER
PREHEAT MODE SETTING
OK
60min
15min
Caution
Note
MX-M310.book  105 ページ  2009年7月6日 月曜日 午後6時57分