Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Sharp
  4. TINSE2026QSZZ
  5. ユーザーズマニュアル

Sharp TINSE2026QSZZ ユーザーズマニュアル

ダウンロード
ページ / 168
121
TROUBLESHOOTING AND MAINTENANCE
7
Paper feeding problems
Problem
Cause and solution
Page
When using paper fed from the 
bypass tray, the copied image is 
skewed.
The number of sheets placed on the bypass tray 
exceeds the maximum number.
→ Do not place more than the maximum number of sheets.
16
The bypass guide is not adjusted to the size of the 
loaded paper.
→ Adjust the bypass guide to the size of the loaded paper.
19
Paper from the bypass tray 
misfeeds.
The paper type setting is not correct.
→ When using a special paper, be sure to set the correct paper 
type.
21
The number of sheets placed on the bypass tray 
exceeds the maximum number.
→ Do not place more than the maximum number of sheets.
16
The bypass guide is not adjusted to the size of the 
loaded paper.
→ Adjust the bypass guide to the size of the loaded paper.
19
Paper misfeeds.
The paper is outside of the specified size and weight 
range.
→ Use copy paper within the specified range.
16
Paper is curled or damp.
→ Do not use curled or crimped paper. Replace with dry copy paper. 
During periods when the machine is not used for a long time, 
remove the paper from the tray and store it in a dark place in a 
bag to prevent moisture absorption.
142
Paper is not loaded properly.
→ Make sure the paper is properly loaded.
18
Pieces of paper remain inside machine.
→ Remove all pieces of misfed paper.
127
Sheets of paper stick together.
→ Fan the paper well before loading it.
18
Output does not collect neatly in 
the output tray of the finisher.
The paper is curled.
→ It may help to turn the paper over in the paper tray.
-
Stapled output does not collect 
neatly.
The paper is curled.
→ It may help to turn the paper over in the paper tray.
-
MX-M310.book  121 ページ  ２００９年７月６日　月曜日　午後６時５７分