Sharp TINSE2026QSZZ ユーザーズマニュアル

ページ / 168
137
7
CHECKING THE TONER QUANTITY 
AND TOTAL COUNT
The approximate quantity of toner remaining and the total count can be displayed as explained below.
● The total count shows the combined output total of the copy, fax, and printer functions.
Checking the total count and toner quantity
Hold down the [COPY] key. The total count and toner quantity appear while the key is held down.
CLEANING THE MACHINE
DOCUMENT GLASS AND RSPF
If the document glass, RSPF, or scanning glass for originals fed from the RSPF (the long narrow glass surface on 
the right side of the document glass) become dirty, the dirt may appear on copies. Always keep these parts clean.
Stains or dirt on the document glass/RSPF will also be copied. Wipe the document glass, the RSPF and the 
scanning window on the document glass with a soft, clean cloth.
If necessary, dampen the cloth with water. Do not use thinner, benzene, or similar volatile cleaning agents.
• Each 11" x 17" (A3) page is counted as two pages. Two-sided 8-1/2" x 11" (A4) size output is counted as two 
sheets
• The amount of toner consumed will vary depending on conditions of usage and the type of originals copied. 
The toner quantity display should only be used as an approximate guide.
Do not spray flammable cleaner gas. Gas from the spray may come in contact with the internal 
electrical components or high-temperature parts of the fusing unit, creating a risk of fire or 
electrical shock.
Surface of document glass
Underside of RSPF
COPY
PRINT
SCAN
ON LINE
DATA
DATA
SPECIAL MODES
2-SIDED COPY
OUTPUT
TOTAL COUNT : 0,123,456
TONER QUANTITY : 100-75%
8½x11
8½x14
Note
Warning
MX-M310.book  137 ページ  2009年7月6日 月曜日 午後6時57分