Sharp TINSE2026QSZZ ユーザーズマニュアル
20
BEFORE USING THE MACHINE
CHANGING A TRAY’S PAPER TYPE AND PAPER SIZE
SETTINGS
SETTINGS
When you change the paper in a tray, follow the steps below to change the tray’s paper type and paper size settings.
The settings cannot be changed when operation has stopped because the paper ran out or a misfeed occurred, or
when an interrupt copy job is being performed.
Even in copy mode, the settings cannot be changed while a print job or received fax is being printed.
The settings cannot be changed when operation has stopped because the paper ran out or a misfeed occurred, or
when an interrupt copy job is being performed.
Even in copy mode, the settings cannot be changed while a print job or received fax is being printed.
1
Load paper in the tray as explained in
"Loading the paper in the paper tray"
(p.18).
"Loading the paper in the paper tray"
(p.18).
2
Press the [SYSTEM SETTINGS] key.
The system settings
menu screen will appear.
menu screen will appear.
3
Touch the [TRAY SETTINGS] key.
The tray settings screen
will appear.
will appear.
4
Select the tray in which you loaded
paper.
paper.
For the tray numbers,
see "PAPER" (p.16).
If the desired tray does
not appear in the display,
use the
see "PAPER" (p.16).
If the desired tray does
not appear in the display,
use the
key or
key
to scroll until it appears.
5
Select the size and type of paper that
is loaded in the tray.
is loaded in the tray.
The currently selected paper type will be highlighted.
• To change the paper type selection, touch the
appropriate type key.
• To change the paper size selection, touch the
appropriate size key.
• To change the displayed size selections to AB sizes,
touch [AB
INCH].
6
Touch the [OK] key.
7
A message appears prompting you to
check the paper in the tray. Check the
paper and then touch the [OK] key.
check the paper in the tray. Check the
paper and then touch the [OK] key.
You will return to the tray settings screen.
• 5-1/2" x 8-1/2" (A5) size paper can only be set for tray 1.
• B5 size paper cannot be set for tray 2 (However, B5R size paper can be set.).
• Tray settings for trays other than the bypass tray can be prohibited in the administrator settings. (See "6.
• B5 size paper cannot be set for tray 2 (However, B5R size paper can be set.).
• Tray settings for trays other than the bypass tray can be prohibited in the administrator settings. (See "6.
SYSTEM SETTINGS (ADMINISTRATOR)".)
Note
JOB STATUS
CAN
FAX
DATA
LINE
DATA
DATA
SYSTEM SETTINGS
TOTAL COUNT
TRAY SETTINGS
ADDRES
CONTRO
CONTRO
KEYBOARD
SELECT
ADMI
CONTRA
TRAY 1
TRAY 2
TRAY 3
PLAIN / 8½x14
PLAIN / 11x17
TYPE / SIZE
PLAIN / 8½x11
SYSTEM SETTINGS
TRAY 1 TYPE/SIZE SETTING
TYPE
RECYCLED
PLAIN
COLOR
LETTER HEAD
11x17
8½x11
8½x14
8½x11R
5½x8½
8½x13
OK
SIZE
AB
INCH
MX-M310.book 20 ページ ２００９年７月６日 月曜日 午後６時５７分