Sharp TINSE2026QSZZ ユーザーズマニュアル

ページ / 168
56
SETTINGS AND PROGRAMMING 
REQUIRED FOR THE NETWORK 
SCANNER FEATURE
To use the Network Scanner feature, settings for the SMTP server, DNS server, and destination addresses must be 
established.
To establish the settings, use a computer that is connected to the same network as the machine to access the 
machine's Web page.
SETTINGS REQUIRED FOR THE NETWORK SCANNER FUNCTION
To use transmit images using the network scanner function, configure the settings in the Web pages as follows:
The following settings can also be configured to enable convenient use of the network scanner function:
• Programming custom index names. (p.61)
• Setting passwords. (p.68)
ACCESSING WEB PAGES
Use the following procedure to access the Web pages.
1
Open the Web browser on your 
computer.
Supported browsers:
Internet Explorer:
6.0 or later (Windows
®
)
Netscape Navigator: 9 or later (Windows
®
)
Firefox:
2.0 or later (Windows
®
)
Safari:
1.5 or later (Macintosh)
2
In the "Address" field of your Web 
browser, enter the IP address of the 
machine as a URL.
Enter the IP address that 
has been programmed in 
the machine.
If you do not know the IP 
address, see page 89.
When the connection is completed, the Web 
page will appear in your Web browser. (p.57)
Scan to FTP
Scan to FTP (Hyperlink)
Scan to E-mail
Scan to Desktop
Access the Web pages (see below) 
Configure basic settings for network scanning (p.58)
Configure your SMTP and DNS server settings (p.59)
Configure LDAP server settings
(when using an LDAP server) (p.60)
Store destination information (p.62 to 65)
Store your sender information (p.67)
MX-M310.book  56 ページ  2009年7月6日 月曜日 午後6時57分