Sharp MX-C400 ユーザーズマニュアル

A job program is a group of copy settings stored together. When copy settings are stored in a job program, the settings 
can be retrieved and used for a copy job by means of a simple operation.
For example, suppose A4 (8-1/2" x 11") size CAD drawings are copied once a month for archive purposes using the 
following settings:

(1) The A4 (8-1/2" x 11") size CAD drawings 

are reduced to A5 (5-1/2" x 8-1/2") size.

(2) The drawings have fine lines that do not 

show clearly, and thus a dark exposure 
setting (level 4) is used.

(3) To reduce paper use by half, 2-sided 

copying is used.

Set A4 (8-1/2" x 11") to A5 (5-1/2" x 8-1/2") reduction

Change the exposure setting

Select 2-sided copying

Press the [COLOUR START] key or 

the [BLACK & WHITE START] key.

Press the [#/P] key.

Select the [Recall] key and press the [OK] key

Select the stored program key and press the [OK] key.

Press the [COLOUR START] key or 

the [BLACK & WHITE START] key.

Considerable time is required to copy the drawings each 
month because the above settings must be selected.
In addition, mistakes are occasionally made when selecting 
the settings, so some copies must be redone.

The settings are stored in a job program, so they can be 
selected by the select of a key. This is simple and takes no time.
In addition, the settings are all stored so there are no chances 
for mistakes, and thus no need to redo copies due to setting 
mistakes.

• Up to 48 job programs can be stored. The job programs are retained even if an interruption occurs in the power supply.

• Job programs can also be stored in the Web pages. Click [Job program] and then [Copy] in the Web page menu to store a 

job program.

A4 (8-1/2" x 11") size CAD drawings

Copies