Sharp MX-7001 ユーザーズマニュアル

When inserting envelopes in the bypass tray, place them aligned to the left side in the orientation shown below.
Only the front side of envelopes can be printed on. Be sure to place the front side face down.

• Do not print on both sides of an envelope. This may result in misfeeds or poor print quality.
• Restrictions apply to some types of envelopes. For more information, consult a qualified service technician.
• Some operating environments may cause creasing, smudging, misfeeds, poor toner fusing, or machine failure.
• Do not use the following envelopes:

Envelopes with metal clasps, plastic hooks, or ribbon hooks; envelopes closed with string, envelopes with windows or 
backing, envelopes with an uneven front surface due to embossing, double-layer envelopes, envelopes with an 
adhesive for sealing, hand-made envelopes, envelopes with air inside, envelopes with creases or fold marks, torn or 
damaged envelopes

• Envelopes with an incorrectly aligned corner gluing position on the back cannot be used as creasing may result.

• Print quality is not guaranteed in the area 13/32" (10 mm) around the edges of 

the envelope.

• Print quality is not guaranteed on parts of envelopes where there is a large 

step-like change of thickness, such as on four-layer parts or parts less than 
three layers.

• Print quality is not guaranteed on envelopes having peel off flaps for sealing the 

envelopes.

Can be used

Cannot be used