Sharp MX-M200D ユーザーズマニュアル
84
SYSTEM SETTINGS GUIDE
Select "MESSAGE TIME" and press the [OK] key. The
following screen will appear.
following screen will appear.
1
Select the desired display time with the
[
[
] or [
] key.
2
Press the [OK] key.
KEY TOUCH SOUND
This program is used to set the volume of the key
touch sound that is heard each time a key is pressed.
The initial factory setting is "SHORT".
touch sound that is heard each time a key is pressed.
The initial factory setting is "SHORT".
Select "KEY TOUCH SOUND" and press the [OK] key.
The following screen will appear.
The following screen will appear.
1
Select the desired volume with the [
] or
[
] key.
To turn the key touch sound off, select "OFF".
2
Press the [OK] key.
KEYS TOUCH SOUND AT INITIAL
POINT
POINT
This program is used to select whether or not a beep
will sound at preset base settings as you press a key
to select a setting.
The factory default setting is no beep.
will sound at preset base settings as you press a key
to select a setting.
The factory default setting is no beep.
If you would like a beep to sound, select "KEYS
TOUCH SOUND AT INITIAL POINT" and press the
[OK] key so that a checkmark appears in the
checkbox.
TOUCH SOUND AT INITIAL POINT" and press the
[OK] key so that a checkmark appears in the
checkbox.
If you would not like a beep to sound, select
"KEYS TOUCH SOUND AT INITIAL POINT" once
again and press the [OK] key so that the
checkmark is cleared from the checkbox.
"KEYS TOUCH SOUND AT INITIAL POINT" once
again and press the [OK] key so that the
checkmark is cleared from the checkbox.
KEY PRESS TIME
This program is used to set the duration of time that a
key must be pressed to take effect.
A longer setting can be selected to prevent keys
pressed accidentally from taking effect. Keep in mind,
however, that when a longer setting is selected more
care is required when pressing keys to ensure that the
key input is registered.
The initial factory setting is "MINIMUM".
key must be pressed to take effect.
A longer setting can be selected to prevent keys
pressed accidentally from taking effect. Keep in mind,
however, that when a longer setting is selected more
care is required when pressing keys to ensure that the
key input is registered.
The initial factory setting is "MINIMUM".
Select "KEY PRESS TIME" and press the [OK] key.
The following screen appears.
The following screen appears.
1
Select the desired time with the [
] or [
]
key.
2
Press the [OK] key.
DISABLE AUTO KEY REPEAT
This program is used to stop a setting from changing
continuously when the [
continuously when the [
] or [
] key is held down,
such as when setting the zoom ratio or the original size
(auto key repeat will not operate). When this program
is enabled, a key must be pressed repeatedly instead
of holding it down.
Auto key repeat is initially set to operate (factory
default setting).
(auto key repeat will not operate). When this program
is enabled, a key must be pressed repeatedly instead
of holding it down.
Auto key repeat is initially set to operate (factory
default setting).
To disable auto key repeat, select "DISABLE AUTO
KEY REPEAT" and press the [OK] key so that a
checkmark appears in the checkbox.
KEY REPEAT" and press the [OK] key so that a
checkmark appears in the checkbox.
To re-enable auto key repeat, select "DISABLE
AUTO KEY REPEAT" once again and press the
[OK] key so that the checkmark is cleared from the
checkbox.
AUTO KEY REPEAT" once again and press the
[OK] key so that the checkmark is cleared from the
checkbox.
DISABLE PAPER SIZE SET
This program is used to disable "PAPER SIZE SET" in
the special functions menu. When disabled, "PAPER
SIZE SET" cannot be used when the [SPECIAL
FUNCTIONS] key is pressed, which prevents users
other than the administrator from easily changing the
paper size setting.
"DISABLE PAPER SIZE SET" is initially disabled
(factory default setting).
the special functions menu. When disabled, "PAPER
SIZE SET" cannot be used when the [SPECIAL
FUNCTIONS] key is pressed, which prevents users
other than the administrator from easily changing the
paper size setting.
"DISABLE PAPER SIZE SET" is initially disabled
(factory default setting).
MESSAGE TIME
SHORT (3 sec.)
SHORT (3 sec.)
NORMAL (6 sec.)
LONG (9 sec.)
KEY TOUCH SOUND
OFF
OFF
SHORT
LONG
KEY PRESS TIME
MINIMUM
0.5 sec.
1.0 sec.
1.5 sec.
1.0 sec.
1.5 sec.