Sharp MX-C310 ユーザーズマニュアル

This section explains what to do when a paper misfeed occurs in the machine.

When a paper misfeed occurs, the message "A misfeed has occurred." will appear in the display and printing and 
scanning will stop. In this event, select the [Information] key in the display. When the key is selected, instructions for 
removing the misfeed will appear. Follow the instructions. When the misfeed is cleared, the message will automatically 
clear.

The approximate locations of possible misfeeds are indicated by blinking 

 marks as shown below.

• When removing misfed paper, do not touch or damage the transfer belt.

• Carefully pull the paper out without tearing it.

• A misfeed may have occurred inside the machine. Check carefully and remove the 

misfeed.

• If the paper tears, be sure to remove all pieces from the machine.

• While the message appears, printing and scanning cannot be resumed.

• If the message does not clear even after the misfeed has been removed, the causes below are possible. Check once 

again.

- The misfeed was not correctly removed.

- A torn piece of paper remains in the machine.

- A cover or unit that was opened or moved to remove the misfeed was not returned to its original position.

misfeed location