Sharp MX-M182D ユーザーズマニュアル
13
SETTING UP BUTTON MANAGER
Button Manager is a software program that works with the scanner driver to enable scanning from the machine.
To scan using the machine, Button Manager must be linked with the scan menu on the machine. Follow the steps
below to link Button Manager.
To scan using the machine, Button Manager must be linked with the scan menu on the machine. Follow the steps
below to link Button Manager.
Windows XP/Vista/7
1
Click the "Start" button, click "Control
Panel", click "Hardware and Sound",
and then click "Scanners and
Cameras".
Panel", click "Hardware and Sound",
and then click "Scanners and
Cameras".
• In Windows 7, click the "Start" button and then
click "Devices and Printers".
• In Windows XP, click the "start" button, select
"Control Panel" and click "Printers and Other
Hardware", and then click "Scanners and
Cameras".
Hardware", and then click "Scanners and
Cameras".
2
Click the "SHARP MX-XXXX" icon and
select "Properties".
select "Properties".
• In Windows 7, right-click the "SHARP
MX-XXXX" icon and select "Scan properties".
• In Windows XP, select "Properties" from the
"File" menu.
3
In the "Properties" screen, click the
"Events" tab.
"Events" tab.
4
Select "SC1:" from the "Select an
event" pull-down menu.
event" pull-down menu.
5
Select "Start this program" and then
select "Sharp Button Manager AA"
from the pull-down menu.
select "Sharp Button Manager AA"
from the pull-down menu.
6
Repeat Steps 4 and 5 to link Button
Manager to "SC2:" through "SC6:".
Manager to "SC2:" through "SC6:".
Select "SC2:" from the "Select an event"
pull-down menu. Select "Start this program",
select "Sharp Button Manager AA" from the
pull-down menu. Do the same for each scan
menu through "SC6:".
pull-down menu. Select "Start this program",
select "Sharp Button Manager AA" from the
pull-down menu. Do the same for each scan
menu through "SC6:".
7
Click the "OK" button.
Button Manager is now linked to the scan menu
(1 through 6).
The scan settings for each of scan menu 1
through 6 can be changed with the setting
window of Button Manager.
For the factory default settings of the scan menu
and the procedures for configuring Button
Manager settings, see "BUTTON MANAGER
SETTINGS"
(1 through 6).
The scan settings for each of scan menu 1
through 6 can be changed with the setting
window of Button Manager.
For the factory default settings of the scan menu
and the procedures for configuring Button
Manager settings, see "BUTTON MANAGER
SETTINGS"
.