Sharp MX-M182D ユーザーズマニュアル

If you need to change any print settings, click the 
"Preferences" button to open the printer driver 
setup screen.
The printer driver setup screen will appear.

Windows 2000 does not have the "Preferences" 
button in this dialog box. Select settings as 
needed on each of the tabs in the setup screen 
and click the "OK" button.
"PRINTER DRIVER SETTING SCREEN" 

(p.67),

Printing begins. When printing begins, the Print 
Status Window automatically opens.
"OUTLINE OF THE PRINT STATUS WINDOW" 

Add paper to the tray that ran out or to the bypass tray. If you add paper to the bypass tray, press the [PRINT] key on 
the machine to switch to printer mode and select "BYPASS-TRAY". Printing will resume. Note that if the "AUTO 
TRAY SWITCHING" setting is selected in the "PAPER SIZE SET" (accessed by pressing the [SPECIAL 
FUNCTION] key) and there is the same size of paper in another tray, the machine will automatically switch to the 
other tray and continue printing.

To pause a print job, press the [PRINT] key on the machine to switch to printer mode and then select "OFFLINE" 
with the [

] key. The machine pauses the print job and then goes offline.

• To cancel a print job, press the [C] key (

).

• To resume printing, select "ONLINE" with the [

] key.

There are two bypass tray settings in "Paper Source" in the "Paper" tab of the printer driver setup screen:

• When "Bypass Tray" is selected, the print job is automatically printed on the paper in the bypass tray.
• When "Bypass Manual" is selected, the print job is not printed until paper is inserted into the bypass tray. If paper 

is already in the bypass tray, remove the paper and then re-insert it to begin printing.

The output tray can be selected when 
selecting print settings at the time of 
printing. To change the tray selection, select 
the desired tray in "Output" in the "Paper" 
tab of the printer driver setup screen.