Sharp MX-M182D ユーザーズマニュアル

ページ / 125
96
TROUBLESHOOTING
6
C. Misfeed in the transport area
1
Open the fusing paper guide by 
pressing down the green-labeled 
projection on the guide and remove 
the misfed paper.
Be careful not to tear the 
misfed paper during 
removal.
2
If the misfed paper cannot be removed 
by the previous step but is visible in 
the paper output area, remove the 
paper by pulling it into the paper 
output area.
Be careful not to tear the 
misfed paper during 
removal.
3
Close the side cover.
The message "
Clear 
paper path." will be 
cleared and copying will 
be possible.
The fusing unit is hot. Do not touch 
the fusing unit when removing misfed 
paper. Doing so may cause a burn or 
injury.
• When closing the side cover, press on the 
handle.
• If the paper was torn, make sure that no 
torn pieces remain in the machine.
• If the message does not clear, check again 
to make sure that no pieces of paper 
remain.
Warning
Note