Sharp AR-BC260 ユーザーズマニュアル
IMAGE EDIT MENU
6-21
6
11" x 17" (A3) Full-bleed
In other copy modes, image loss will occur along the copy edges. When the 11" x 17" (A3) FULL-BLEED function is
used, the full image of an 11" x 17" (A3) size original will be copied onto 12" x 18" (A3W) size copy paper.
The 11" x 17" (A3) FULL-BLEED function can only be used when the original is placed on the document glass. (The
reversing single pass feeder cannot be used.)
Reduction or enlargement cannot be selected with this function. If reduction or enlargement has been selected, the
copy ratio will be reset to 100% when this function is selected.
Automatic two-sided copying is not possible.
used, the full image of an 11" x 17" (A3) size original will be copied onto 12" x 18" (A3W) size copy paper.
The 11" x 17" (A3) FULL-BLEED function can only be used when the original is placed on the document glass. (The
reversing single pass feeder cannot be used.)
Reduction or enlargement cannot be selected with this function. If reduction or enlargement has been selected, the
copy ratio will be reset to 100% when this function is selected.
Automatic two-sided copying is not possible.
1
Touch the [11x17 FULL-BLEED] key on the
IMAGE EDIT menu screen.
IMAGE EDIT menu screen.
The [11x17 FULL-
BLEED] key will be
highlighted to indicate
that the function is
turned on, and the full-
bleed icon (
BLEED] key will be
highlighted to indicate
that the function is
turned on, and the full-
bleed icon (
) will
appear in the upper left
of the screen.
of the screen.
2
Touch the [OK] key on the IMAGE EDIT
menu screen.
menu screen.
Return to the SPECIAL MODES screen.
3
Touch the [OK] key on the SPECIAL
MODES screen.
MODES screen.
Return to the main screen of copy mode.
4
Load 12" x 18" (A3W) copy paper into the
bypass tray.
bypass tray.
Adjust the bypass guide
to 12" x 18" width before
loading the paper.
Remove any paper
remaining in the tray.
Pull out the tray
extension and wire
extension. (See page 2-
4)
to 12" x 18" width before
loading the paper.
Remove any paper
remaining in the tray.
Pull out the tray
extension and wire
extension. (See page 2-
4)
5
Touch the [PAPER SELECT] key on the
touch panel and then select the paper type
in the bypass tray.
touch panel and then select the paper type
in the bypass tray.
Touch the [PLAIN] key or the [HEAVY PAPER]
key.
If you touched the [HEAVY PAPER] key, touch the
[HEAVY PAPER1] key or the [HEAVY PAPER2]
key as appropriate for the weight of the paper you
loaded. (See step 3 on page 2-12.)
key.
If you touched the [HEAVY PAPER] key, touch the
[HEAVY PAPER1] key or the [HEAVY PAPER2]
key as appropriate for the weight of the paper you
loaded. (See step 3 on page 2-12.)
Original (11" x 17" (A3)) size
Copy (12" x 18" (A3W)) size
SINGLE COLOR
11x17
FULL-BLEED
MULT
ENLA
To cancel the 11 x 17 (A3) FULL-BLEED function,
touch the [11x17 FULL-BLEED] key again on the
IMAGE EDIT menu screen (step 1).
touch the [11x17 FULL-BLEED] key again on the
IMAGE EDIT menu screen (step 1).
PLAIN
PLAIN
HEAVY PAPER
TRANSPARENCY
ENVELOPE
RECYCLED
COLOR
PLAIN
12x18
AUTO
EXPOSURE
AUTO
ORIGINAL
PAPER SELECT
100
%
COPY RATIO
READY TO COPY.
0
INTERRUPT
1. 8½x11
2. 8½x14
3. 11x17
4. 8½x11R
ApollonII_general-copy_SEC.book 21 ページ ２００４年９月６日 月曜日 午後４時５７分