Sharp AR-BC260 ユーザーズマニュアル
SADDLE STITCH FINISHER
3-3
3
Specifications are subject to change for improvement without notice.
Supplies
AR-SC2 staple cartridges must be used for this finisher.
The cartridge package contains three cartridges of approximately 5000 staples
each.
The cartridge package contains three cartridges of approximately 5000 staples
each.
Staple
Allowed paper sizes for stapling
Upper tray: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
Upper tray: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
A3, B4, A4, A4R, B5
Lower tray: 11" x 17", 8-1/2" x 11"R, A3, B4, A4R
Maximum number of sheets for stapling
See "Staple sort mode" on the next page
See "Staple sort mode" on the next page
Stapling positions
Upper tray: 3 locations (1 position back, 1 position front, 2 positions center)
Lower tray: 4-47/64" (120 mm) pitch from center of paper
Upper tray: 3 locations (1 position back, 1 position front, 2 positions center)
Lower tray: 4-47/64" (120 mm) pitch from center of paper
Saddle stitch
Maximum of 10 sheets can be stapled (21 lbs. or 80 g/m
2
)
Paper size: 11" x 17", 8-1/2" x 11"R, A3, B4, A4R
Paper weight: 17 to 28 lbs. or 64 to 105 g/m
Paper weight: 17 to 28 lbs. or 64 to 105 g/m
2
Power supply
Supplied from machine (Stand / paper drawer)
Dimensions
24-59/64" (W) x 23-3/4" (D) x 30-23/64" (H)
(633 mm (W) x 603 mm (D) x 771 mm (H))
(633 mm (W) x 603 mm (D) x 771 mm (H))
Weight
Approximately 79.4 lbs. (36 kg)
Overall dimensions when
attached to machine
attached to machine
1432 mm (W) x 676 mm (D) (56-25/64" (W) x 26-5/8" (D)) (when tray is extended)
Remarks
Paper output
Upper tray: Supports both face-up and face-down output Lower tray: Face-down output only
Paper full detection
Both upper and lower tray
Offset function
Upper tray only (offset function not possible for 12" x 18", 5-1/2" x 8-1/2"R, A3W
and A5R size paper)
and A5R size paper)
Paper conveying
Center reference
Name
Punch module
Hole punching
3 or 2 holes
Allowed paper sizes for
punching
punching
3 holes: 11" x 17", 8-1/2" x 11", A3, A4
2 holes: 8-1/2" x 14", 8-1/2" x 11"R
2 holes: 8-1/2" x 14", 8-1/2" x 11"R
Power supply
Supplied from machine saddle stitch finisher
Dimensions
3-3/4" (W) x 22-1/16" (D) x 6-45/64" (H) (95 mm (W) x 560 mm (D) x 170 mm (H))
Weight
Approximately 5.6 lbs. (2.5 kg)
NOTES
● Transparency film, envelopes, postcards, and other special papers cannot be stapled.
● If mixed paper sizes are selected for stapling jobs, stapling will be automatically canceled.
● Transparency film, envelopes, postcards, and other special papers cannot be stapled.
● If mixed paper sizes are selected for stapling jobs, stapling will be automatically canceled.
ApollonII_general-copy_SEC.book 3 ページ ２００４年９月６日 月曜日 午後４時５７分