Sharp MX-M623N ユーザーズマニュアル
8-55
Punching does not
take place.
take place.
Does a message appear instructing you
to check the punch module?
to check the punch module?
Dispose of punch scraps.
☞
1. BEFORE USING THE MACHINE "
Is a different size of paper mixed in?
Punching is not possible when different widths of paper
are mixed together. To perform mixed size punching,
use paper of the same width and select the [Same
Width] setting. When copying, select [Same Width] for
[Mixed Size Original] in the special modes.
are mixed together. To perform mixed size punching,
use paper of the same width and select the [Same
Width] setting. When copying, select [Same Width] for
[Mixed Size Original] in the special modes.
Is a paper size that cannot be punched
included in the print job?
included in the print job?
For the paper sizes that can be punched, see
"
"
" in "1. BEFORE USING
THE MACHINE".
Is the tray selected in the printer driver
set to a paper type that cannot be
punched?
set to a paper type that cannot be
punched?
Check the paper type settings in the machine and select
a tray that has paper that can be used for punching*.
Click the [Tray Status] button in "Paper Selection" on
the [Paper] tab of the printer properties window and
check the paper type setting of each tray.
* Punching is not possible on labels, tab paper, and
a tray that has paper that can be used for punching*.
Click the [Tray Status] button in "Paper Selection" on
the [Paper] tab of the printer properties window and
check the paper type setting of each tray.
* Punching is not possible on labels, tab paper, and
transparency film. In addition, if "Disable Punch" is
selected in the user type, punching will not be
possible.
selected in the user type, punching will not be
possible.
Have functions been disabled by the
administrator?
administrator?
Check with your administrator.
Some functions may have been disabled in the system
settings (administrator).
Some functions may have been disabled in the system
settings (administrator).
The stapling position
or punch position is
not correct.
or punch position is
not correct.
Is the stapling position set correctly?
Check the stapling position setting.
☞
2. COPIER "
" (page 2-32)
Are the punching positions set
correctly?
correctly?
Check the punch position settings.
☞
2. COPIER "
" (page 2-32)
Folding does not take
place.
place.
Did the administrator enable the
"Disabling of Duplex" setting?
"Disabling of Duplex" setting?
The folding function cannot be used when "Disabling of
Duplex" is enabled in the system settings
(administrator). Check with your administrator.
Duplex" is enabled in the system settings
(administrator). Check with your administrator.
Are you using a paper type that has a
specific front and reverse side?
specific front and reverse side?
The folding function cannot be used with pre-printed
paper, letterhead paper, or other paper that has a
specific front and reverse side.
When folding paper, use a paper type such as plain
paper that does not have specific a front and reverse
side.
paper, letterhead paper, or other paper that has a
specific front and reverse side.
When folding paper, use a paper type such as plain
paper that does not have specific a front and reverse
side.
Stapling position is
not correct (including
saddle stitch).
not correct (including
saddle stitch).
The desired staple mode is not
selected.
selected.
Select the desired staple mode at the operation panel of
the inserter.
the inserter.
☞
1. BEFORE USING THE MACHINE "
The paper is not loaded in the correct
position.
position.
Load the paper correctly.
☞
1. BEFORE USING THE MACHINE "
The paper is not loaded face up.
Paper must be loaded face up in the inserter tray.
☞
1. BEFORE USING THE MACHINE "
Problem
Point to check
Solution