Sharp AR-650 ユーザーズマニュアル
25
HOW TO
MAKE
COPIES
When Placing the Original on the Glass
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.
the bottom toward you and the left side
centered against the original scale.
. The sensor unit immediately detects the size
of the original, and selects the appropriate
paper size.
paper size.
. Close the automatic document feeder slowly
after the original size has been detected.
3
Select the exposure.
. The AUTO-EXPOSURE mode is set as the
default mode, and provides the optimum
exposure automatically according to the
darkness of the original.
exposure automatically according to the
darkness of the original.
. If you want to select the desired exposure,
see page 46.
4
Key in the desired copy quantity.
. You can key in up to 999.
. There is no need for this when making only
. There is no need for this when making only
one copy.
. When an incorrect quantity is set, press the
CLEAR key and key in the correct number.
1
2
3
4
5
6
7
8
9
0
C
ALL CLEAR
STOP
START
CLEAR
C
. Sometimes the following message appears:
Change direction of original
change the direction of the original on the
glass.
If the following message appears:
glass.
If the following message appears:
Set correct cassette
install the correct-sized cassette.
,
,