Sharp AR-650 ユーザーズマニュアル
48
12. BYPASS COPYING
The bypass copying mode is convenient in the following instances:
• when the size of any of the paper cassettes installed in the copier is not that which you
• when the size of any of the paper cassettes installed in the copier is not that which you
require.
• when you want to use a special type of paper such as OHP film.
1
Place the original(s) on the original feed
tray or on the glass.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
align the slides to the edges of the originals.
Note: Remove any paper clips or staples from
originals before placing them on the
original feed tray.
original feed tray.
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.
the bottom toward you and the left side
centered against the original scale.
2
Select the desired exposure and
reproduction ratio.
Slides