Sharp AR-650 ユーザーズマニュアル
57
USING THE
EDITING
FUNCTIONS
4
5
Place the originals on the original feed tray
or on the glass.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
align the slides to the edges of the originals.
. Place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.
centered against the original scale.
Press the SET key.
. The set margin default is 7 mm.
. To change the margin:
. To change the margin:
Press the 0mm or 30mm key to select
the desired margin setting, and press the SET
key.
the desired margin setting, and press the SET
key.
. When combining image shifting with duplex
copying, select FRONT for the front side and
BACK for the back side of the copy.
BACK for the back side of the copy.
6
Select the desired copy size, exposure,
reproduction ratio and copy quantity.
7
Tip: Margins can be created also in the bypass
copy mode. To do this, set the paper in the
sheet bypass (see page 50), and press the
desired COPY-SIZE key to select the paper
size. If LETTER-R paper is used, press the
corresponding COPY-SIZE key twice.
sheet bypass (see page 50), and press the
desired COPY-SIZE key to select the paper
size. If LETTER-R paper is used, press the
corresponding COPY-SIZE key twice.
Press the START key.