Sharp AR-C360P ユーザーズマニュアル

Sharp AR-C360P User’s Guide

Control panel > 36

The Enter, Up-arrow, Down-arrow and Back buttons are used to 
move through the printer menus. You can adjust settings (e.g. set 
the paper size for Tray 1) or view information (e.g. how much is left 
of a selected consumable).

Many of these menu settings can be, and often are, overridden by 
settings in the Windows printer drivers. However, several of the 
driver settings can be left at "Printer Setting," which will then default 
to the settings entered in these printer menus.

The steps involved in using the menus are typically as follows:

Ensure that the display panel indicates that the printer is 
ready to print.

Enter User menu mode by pressing either the Enter button 
or the Up-arrow or Down-arrow button and press the 
latter two repeatedly until the desired menu is highlighted in 
the displayed list.

Press the Enter button to select this menu.

Press the Up-arrow or Down-arrow buttons repeatedly 
until the desired Item is highlighted.

Press the Enter button to select this Item.

Press the Up-arrow or Down-arrow buttons repeatedly 
until the desired Value is highlighted.

Press the Enter button to select this Value. (If you are 
setting a parameter, ensure that an asterisk (*) appears 
beside the selected parameter Value.)

Press the Online button to exit menu mode and return to the 
ready to print status.

Refer to the section entitled 

 and 

 for examples of using the 

menus.