Sharp AR-C360P ユーザーズマニュアル

Sharp AR-C360P User’s Guide

Getting started > 40

Carry out the following steps to generate a Configuration report 
(Menu Map) to confirm that your printer is correctly configured.

Ensure that there is Letter paper in Tray 1 (to be used in this 
operation).

Ensure that the display panel indicates that the printer is 
ready to print.

Press the Up-arrow or Down-arrow buttons repeatedly 
until Print Pages is highlighted.

Press the Enter button to select Print Pages.

Press the Up-arrow or Down-arrow buttons repeatedly 
until Configuration is highlighted.

Press the Enter button to select Configuration.

Press the Enter button to execute the command and a 
Configuration document is printed.

After printing the configuration document, the printer returns 
to the ready to print status.

You can use this document to check your printer 
configuration. System values and installed accessories are 
listed at the top of the first page while status values and 
settings follow.

Your printer is equipped with a selection of data interfaces:

Parallel – For direct connection to a PC. This port requires a 
bi-directional (IEEE 1284 compliant) parallel cable.

USB – For connection to a PC running Windows 98 or above 
(not Windows 95 upgraded to Windows 98) or Macintosh. 
This port requires a cable conforming to USB version 2.0 or 
above.

The printer may not work if a USB- compatible device is 
connected concurrently with other USB-compatible machines.

When connecting multiple printers of the same type, they 
appear as *****, ***** (2), ***** (3), etc. These numbers 
depend on the order of connecting or turning on each printer.