Sharp MX-M453N ユーザーズマニュアル

ページ / 116
112
REMOVING MISFEEDS
When a paper misfeed occurs, the message "A misfeed has occurred." will appear in the touch panel and printing 
and scanning will stop. In this event, touch the [Information] key in the touch panel. When the key is touched, 
instructions for removing the misfeed will appear. Follow the instructions. When the misfeed is cleared, the 
message will automatically clear.
The blinking 
 mark in the image at left indicates the approximate position of the misfeed.
Touch the [Information] key to display the following 
screen.
(A) Instructions for removing the misfeed appear 
here.
(B) Animation showing what to do.
(C) Display the previous screen or the next screen.
(D) This closes the information screen.
The information screen cannot be closed until the 
misfeed is removed.
For detailed procedures for removing misfeeds, see "REMOVING MISFEEDS" in "8. TROUBLESHOOTING" in 
the Operation Guide.
Information
OK
Exit
Open the centre cover and remove the misfed originals.
Misfeed Removal
Back
Next
A misfeed has occurred.
Turning M/C off now causes data loss.
(C)
(B)
(A)
(D)
Misfeed location
• While the message appears, printing and scanning cannot be resumed.
• If the message does not clear even after the misfeed has been removed, the causes below are possible. Check 
once again.
- The misfeed was not correctly removed.
- A torn piece of paper remains in the machine.
- A cover or unit that was opened or moved to remove the misfeed was not returned to its original position.
08-1_Quick(Trouble).fm  112 ページ  2009年3月10日 火曜日 午前11時33分