Sharp MX-M362N ユーザーズマニュアル

Has the paper type been set correctly?

Set the correct paper type for the tray that contains 
the paper specified for the cover or insert.
If the paper type set for the cover or insert is not the 
same as the paper type set for the tray, paper will be fed 
from a different tray.

➞ System Settings > "Paper Tray Settings" > "Tray 

Settings"

Is the USB device compatible with the 
machine?

Ask your dealer if the device is compatible with the 
machine.

Is the connected USB device 
recognized correctly?

Use "USB-Device Check" in the system settings to 
check whether or not the device can be recognized.

➞ System Settings > "USB-Device Check"

If it is not recognized, connect it once again.

Is the format of the USB memory 
FAT32?

If the format of the USB memory is other than FAT32,  
use your computer to change the format to FAT32.

Are you using a USB memory with a 
capacity of more than 32 GB?

Use a 32 GB or less USB memory.

Does a message appear indicating that 
you need to remove paper from the 
stapler compiler?

Remove all remaining paper from the stapler compiler.

Does the following message appear in 
the touch panel?
"Call for service. Code:xx-xx* Please 
check the power of the finisher."
*Letters and numbers appear in xx-xx.

Check the finisher / saddle stitch finisher and the 
power plug.
Remove and then firmly reinsert the power plug, and 
restart the machine.

Have functions been disabled by the 
administrator?

Check with your administrator.
Some functions may have been disabled in the system 
settings (administrator).

Does a message appear instructing you 
to check the staple unit?

☞

" (page 8-14)