Sharp MX-M182 ユーザーズマニュアル

If the software is not installed correctly, check the following items on your computer.

If the driver cannot be installed in Windows 2000/XP, 
follow these steps to check your computer's settings.

In Windows 2000, click the "Start" button, select 
"Settings", and then click "Control Panel".

In Windows 2000, double-click the "System" icon.

If the option "Block" has been selected, it will not 
be possible to install the driver. Select the option 
"Warn" and then install the driver as explained in 
"INSTALLING THE SOFTWARE" 

If the Plug and Play window does not appear after you 
connect the machine to your computer with a USB 
cable and turn on the machine, follow the steps below 
to verify that the USB port is available.

• In Windows XP, click the "start" button, click 

"Control Panel", and then click "Performance 
and Maintenance".

• In Windows 2000, click the "Start" button, select 

"Settings", and then click "Control Panel".

"Universal Serial Bus controllers" will appear in 
the list of devices.
• In Windows XP, click "System", click the 

"Hardware" tab, and click the "Device Manager" 
button.

• In Windows 2000, double-click the "System" 

icon, click the "Hardware" tab, and click the 
"Device Manager" button.

Two items should appear: your controller chipset 
type and Root Hub. If these items appear, you 
can use the USB port. If the "Universal Serial Bus 
controllers" shows a yellow exclamation point or 
does not appear, you must check your computer 
manual for USB troubleshooting or contact your 
computer manufacturer.